Emax Skyline, Naze 32 based Flight Controller Acro Version
Cleanflight & Baseflight supported. (The SKYLINE32 is flashed with Baseflight)
Unique wire-to-board connectors for easier wiring.
Thin and light weight design.
L883 digital, three-axis compass, sensor chip.
32-bit ARM micro processor running at 3.3V / 72MHZ.
Manual mode, Angle mode, Horizon mode, heading hold mode.
Supports various multirotors, Quads, Tri-s, Hexes - ect.
Flexible RC input: standard, CPPM (PPM SUM)
Battery voltage monitoring and low alarm.
Micro-USB: For flashing firmware & adjusting parameters
GPS position hold / “Return to home” function (GPS Optional).
Dimension: 1.37 x 1.37 x .196" / 35mm x 35 mm x 5 mm (1.2" or 30.5mm Mounting)
Weight: 0.169oz / 4.8g (W/O wires)
Note: SKYLINE32 hardware is compatible with NAZE32 firmware, including cleanflight, baseflight. Below are the links to the source codes:
SKYLINE32 is loaded with baseflight and Baseflight-Configurator GUI. This manual is a baseflight Setup Tuning Guide for SKYLINE32.
If you are using cleanflight firmware, please refer to the below link to download and install cleanflight Configurator:
You can find the manual for the Skyline 32 on Emax's site.
Emax Skyline 32 Flight Controller Acrobatic version
- Brand: E-Max
- Product Code: Skyline 32 Flight Controller ACRO Naze SKU Style No. : EMAX 134
- Availability: In Stock
- (Excl. VAT) £13.00